Back to Wall Toilets
Back to wall toilets are installed with the rear of the toilet pan against a service wall or IPS duct panel. They are combined with a concealed cistern installed behind the same service wall or duct panel. This type of installation means all supply and waste pipework is concealed from view.
- RAK Origin Back To Wall Toilet With Soft Close Seat
As low as £104.40 £87.00
- RAK-Compact Special Needs Rimless Back to Wall Toilet - 42.5cm or 45.5cm High
As low as £122.40 £102.00
- RAK-Resort Back to Wall Toilet with Wrap Over Soft Close Seat
As low as £138.00 £115.00
- RAK-Junior School Height Back to Wall Toilet with Seat
As low as £140.40 £117.00
- RAK-Series 600 Back to Wall Toilet with Soft Close Toilet Seat
As low as £144.00 £120.00
- RAK-Tonique Back to Wall Toilet with Soft Close Seat
As low as £151.20 £126.00
- RAK-Series 600 Rimless Back to Wall Toilet with Soft Close Seat
As low as £156.00 £130.00
- RAK-Resort Comfort Height Back to Wall Pan with Soft Close Seat - 42.5cm or 45cm
As low as £171.60 £143.00
- RAK-Compact Special Needs Rimless Back to Wall Toilet - 70cm or 75cm Projection
As low as £309.60 £258.00
- DVS Back to Wall Vandal Resistant Toilet with Blue Seat
As low as £769.20 £641.00
What is a Back to Wall Toilet?
A back to wall toilet essentially means that the user’s back will sit flush against the wall when seated, as opposed to against a cistern. When entering the cubicle, you’ll be presented with the toilet pan, but the cistern, which holds the water for flushing, will not be visible.
Why choose a back to wall toilet?
A lot of people go for this option as it can make the space inside the toilet cubicle seem much bigger. However, sometimes it’s a move to prevent tampering or accidental damage. When the cistern is exposed like on your traditional domestic toilet, users can remove or damage moving parts. Back to wall toilets can also look very slick and smart, maintaining a simple design aesthetic throughout your wash space.
Things to bear in mind
Although back to wall toilets, such as the RAK Origin, have no cistern on show, the water for flushing them has to come from somewhere. Most often, it is hidden within a false wall known as an IPS duct set. This conceals all the pipework and the cistern within. This creates what’s known as an integrated plumbing system (IPS). The panels, which conceal the cistern can be removed with a key or special tool, making maintenance simple, but protecting your washroom from vandalism and accidental damage.
Because back to wall toilets are partnered with an IPS system, the cubicle has reduced surface areas. This is because you essentially have four flat wall surfaces and a small protruding toilet pan. This makes the washroom easier to clean and when used across large sites like schools, museums and universities, can bring significant value. With fewer moving parts on display, they often need less maintenance compared to close coupled toilets too.
Many common questions and general advice on Commercial Toilets can be found by reading our blog. However, get in touch with us today if you're interested in learning more about our Back to Wall toilet units, or any of our other washroom products.