Delabie Tempostop 1/2” Urinal Push Flush Valve

As low as £49.80 £41.50
777000-1

The Tempostop 1/2" (inch) urinal push flush valve is used for manual flushing of a urinal for a 3-second flow time.

The valve is sturdy and made from chrome plated solid brass with a back wall plate. Available to suit a straight inline connection (top inlet) or angled connection (rear water connection).

The Tempostop 1/2" (inch) urinal push flush valve is used for manual flushing of a urinal for a 3-second flow time.

The valve is sturdy and made from chrome plated solid brass with a back wall plate. Available to suit a straight inline connection (top inlet) or angled connection (rear water connection).

Please note: this valve is designed to be used to flush directly from mains water supply only. If it is used with a cistern or header tank there will not be sufficient pressure. 

Key Features:

  • For standard, siphon action, or stall urinals.
  • Time flow ~3 sec.
  • Suitable for system pressures of 1.0 - 5.0 bar.
  • Flow rate pre-set at 0.15 l/sec. at 3 bar (adjustable).
  • Chrome-plated solid brass body 
  • Wall plate.
  • 10-year manufacturers warranty.
Write Your Own Review
You're reviewing:Delabie Tempostop 1/2” Urinal Push Flush Valve