DISCONTINUED - Ultra Flush SGL Toilet Cubicles With Stainless Steel Hardware
The Commercial Washrooms range of Ultra Flush Toilet Cubicles is a minimalistic and classy washroom cubicle design with a flush front to give a sleek finish. Suitable for use within wet or dry environments, panels and doors are manufactured from solid grade laminate (SGL) with cubicle fittings made from stainless steel.
Ultra Flush SGL surface can be easily cleaned using water and is impervious to bacteria and cleaning chemicals, offering long life and ease of maintenance. Use of harsh chemicals can cause colour fading/loss.
The cubicle partitions, pilasters & doors are manufactured from 12.5mm Solid Grade Compact Laminate (SGL) with routered edges and black core. Satin stainless steel headrail, pilaster brackets, wall brackets, legs, locks and hinges finish this stylish design.
The cubicle prices displayed incorporates the common washroom layouts. Between walls assumes 2 solid walls on either side of the cubicle run and wall angle assumes the run of cubicles will be installed against 1 solid side wall.
Ultra Flush Cubicle Colours:
An attractive range of laminate colours are available. Please see attached Polyrey colour chart. Other finishes available at an increased cost.
The Ultra cubicle range is designed and supplied for size flexibility and ease of installation. Panels are manufactured bespoke to your room sizes. CAD drawings will be produced on order to confirm exact dimensions required.
All cubicle ranges displayed on the Commercial Washrooms website are straightforward to install for any competent tradesman. However, for those in need of a full supply and installation service, we can help. Please contact the team for full details.
For a full quotation please contact us with your room(s) layout.
- Doors: 12.5mm Solid Grade Compact (SGL) with routered edges and black core.
- Partitions: 12.5mm Solid Grade Compact (SGL) with routered edges and black core.
- Pilasters: 12.5mm Solid Grade Compact (SGL) with routered edges and black core.
- Hardware: Satin Stainless Steel (SSS) fittings – Headrail, pilaster brackets, wall brackets, adjustable leg, door lock and hinges.
- Overall Cubicle Height: 1975mm (150mm from floor)
- Partition Square Height: 1825mm
- Partition Depth: Made to the depth required
- Pilaster Height: 1825mm
- End/Wall Pilaster Width: 125mm
- Centre Pilaster Width: 230mm
- Door Width: Made to measure
- Door Height: 1775mm