Future HPL Changing Cubicle with SAA Hardware - Door Assembly

Typically 18-21 Working Days From Sign Off
Product Code:
CHFuture-DA
£603.60 £503.00

Future changing cubicles are designed for installation in changing rooms with a predominantly dry environment. Suitable for changing rooms with low humidity such as gyms and schools. Not suitable for swimming pools or areas with high humidity.

All cubicle doors and partition panels are manufactured from 18mm thick Melamine Faced Chipboard (MFC) grade board as standard with a moisture resistant core and high impact resistant melamine facing. Panel edges are finished with 2mm PVC trim. Pilasters are manufactured from post formed high-pressure laminate (HPL) which leaves an attractive rounded edge.

Read more

Two Inc

30 days free credit with Two Inc

Buy Now, Pay Later, options at checkout

Future changing cubicles are designed for installation in changing rooms with a predominantly dry environment. Suitable for changing rooms with low humidity such as gyms and schools. Not suitable for swimming pools or areas with high humidity.

All cubicle doors and partition panels are manufactured from 18mm thick Melamine Faced Chipboard (MFC) grade board as standard with a moisture resistant core and high impact resistant melamine facing. Panel edges are finished with 2mm PVC trim. Pilasters are manufactured from post formed high-pressure laminate (HPL) which leaves an attractive rounded edge.

The cubicle fittings come in satin anodised aluminium finish as standard.

The toilet cubicle prices displayed incorporates the common washroom layouts. Between walls assumes 2 solid walls on either side of the cubicle run and wall angle assumes the run of cubicles will be installed against 1 solid side wall.

Cubicle Colours:

An attractive range of colours is available. Please see attached Polyrey and Formica colour charts. Other finishes available at an increased cost. Availability is only in the MFC indicated options.

Cubicle Installation:

All toilet cubicle ranges displayed on the Commercial Washrooms website are straight forward to install for any competent tradesman. However, for those in need of a full supply and installation service we can help. Please contact the team for full details.

For a full quotation please contact us with your room(s) layout.

Materials Specification:

Doors: 18mm moisture resistant Melamine Faced Chipboard (MFC) with 2mm high impact ABS edging

Partitions: 18mm moisture resistant Melamine Faced Chipboard (MFC) with 2mm high impact ABS edging

Pilasters: 18mm Moisture resistant high-density particle board core faced with 0.8mm HPL, radius post formed vertical profile with 2mm high impact ABS edging

Hardware: Satin Anodised Aluminium (SAA) fittings – Headrail, pilaster brackets, wall brackets, adjustable leg, Pilaster lock and hinges.

Dimensions Guide:

  • Overall Cubicle Height: 2000mm including 150mm adjustable leg clearance
  • Partition Square Height: 1800mm
  • Partition Depth: Made to depth required
  • Pilaster Height: 1850mm
  • End/Wall Pilaster Width: 115mm
  • Centre Pilaster Width: 230mm
  • Door Width: Made to measure
  • Door Height: 1800mm
Write Your Own Review
You're reviewing:Future HPL Changing Cubicle with SAA Hardware - Door Assembly
Your Rating

File(s)

Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.

Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.

Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.

Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.

Delivery timescales

We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.

All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.

Further information can be found on our delivery service page.

Product Returns

We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.

If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.

Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.

Email: [email protected]

Phone: 01202 650900

Click here to read our full Terms on Returns.

Product Warranty

Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.

Email: [email protected]

Phone: 01202 650900

Click here to read our full Terms and Conditions.

  • Trade Account
  • Fast Delivery
  • New Project
  • Trade Account
  • Fast Delivery
  • New Project