Account
01202 650900
As low as £319.20 £266.00
High Pressure Laminate (HPL) vanity top to suit inset or lay-on style wash hand basins. This vanity top offer a stylish design at an affordable price. Suitable for use with either a support leg or vanity underframe (VUUF) with easy access panels.
The vanity top is manufactured from fully formed 18mm thick High-Pressure Laminate (HPL) sheet. With a moisture-resistant core and shaped to provide a rear up-stand, and front down stand. The vanity top is supplied without holes for basins, these must be cut on site by the purchaser to suit the desired basin.
30 days free credit with
Buy Now, Pay Later, options at checkout
High Pressure Laminate (HPL) vanity top to suit inset or lay-on style wash hand basins. This vanity top offers a stylish design at an affordable price. Suitable for use with either a support leg or vanity underframe (VUUF) with easy access panels.
The vanity top is manufactured from fully formed 18mm thick High-Pressure Laminate (HPL) sheet. With a moisture-resistant core and shaped to provide a rear up-stand, and front down stand. The vanity top is supplied without holes for basins, these must be cut on site by the purchaser to suit the desired basin.
Ideally suited to dry environments. The price displayed is for a vanity top only. Support leg or underframe/access panels are sold separately.
Underframes and access panels can be purchased in either High-Pressure Laminate (HPL) or Solid Grade Laminate (SGL). *HPL should only be used in a predominantly dry environment where the risk of water dropping onto the access panels is minimal. SGL underframes are suitable for wet or dry environments.
Colours:
HPL vanity tops come in a wide variety of laminate colours from either Polyrey or Formica washroom ranges. please see the attached PDFs for details. Alternative colours are available on request.
Sizes:
Vanity units are priced and purchased at various length bands but are usually manufactured to your exact requirements. This inset unit is supplied at 600mm deep as standard (bespoke dimensions available). Comes complete with a 100mm rear up-stand and 200mm forehead (front down stand).
After purchasing online we will be in contact to establish the exact dimensions of the vanity unit you require and your desired colours. Any top over 3500mm long will have a join in the top.
If your vanity unit is positioned so that either end is exposed (and not against a wall), you will also need to order end panel and capping for each exposed end. Capping is not required if the vanity unit runs from wall to wall.
All vanity units and toilet cubicles displayed on the Commercial Washrooms website are straightforward to install for any competent tradesman.
Product codes:
- PFLVANHPL-0-I
- PFLVANHPL-1500-I - 1001-1500mm, Inset (HPL) Postformed Laminated Vanity Top
- PFLVANHPL-2000-I - 1501-2000mm, Inset (HPL) Postformed Laminated Vanity Top
- PFLVANHPL-2500-I - 2001-2500mm, Inset (HPL) Postformed Laminated Vanity Top
- PFLVANHPL-3000-I - 2501-3000mm, Inset (HPL) Postformed Laminated Vanity Top
- PFLVANHPL-3500-I - 3001-3500mm, Inset (HPL) Postformed Laminated Vanity Top
- PFLVANHPL-4000-I - 3501-4000mm, Inset (HPL) Postformed Laminated Vanity Top
- HPLVUUF-1000 - HPL 0-1000mm Vanity Unit Underframe and Access Panels
- HPLVUUF-1500 - HPL 1001-1500mm Vanity Unit Underframe and Access Panels
- HPLVUUF-2000 - HPL 1501-2000mm Vanity Unit Underframe and Access Panels
- HPLVUUF-2500 - HPL 2001-2500mm Vanity Unit Underframe and Access Panels
- HPLVUUF-3000 - HPL 2501-3000mm Vanity Unit Underframe and Access Panels
- HPLVUUF-3500 - HPL 3001-3500mm Vanity Unit Underframe and Access Panels
- HPLVUUF-4000 - HPL 3501-4000mm Vanity Unit Underframe and Access Panels
- VUUF-1000 - SGL 0 - 1000mm Vanity Unit Underframe and Access Panels
- VUUF-1500 - SGL 1001 - 1500mm Vanity Unit Underframe and Access Panels
- VUUF-2000 - SGL 1501 - 2000mm Vanity Unit Underframe and Access Panels
- VUUF-2500 - SGL 2001 - 2500mm Vanity Unit Underframe and Access Panels
- VUUF-3000 - SGL 2501 - 3000mm Vanity Unit Underframe and Access Panels
- VUUF-3500 - SGL 3001 - 3500mm Vanity Unit Underframe and Access Panels
- SGLVUUF-4000 - SGL 3501 - 4000mm Vanity Unit Underframe and Access Panels
- 1RPHPLC - End Panel and Capping for HPL Vanity Unit
- 1RPSGLC - End Panel and Capping for SGL Vanity Unit
-
Do you Tile Behind a Vanity Unit? To tile behind a Bathroom Sink Vanity Unit or not? Here we aim to guide installers who are tiling walls behind Bathroom Sik Vanity Units during a Washroom Refurbishment.
Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.
Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.
Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.
Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.
Delivery timescales
We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.
All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.
Further information can be found on our delivery service page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
