Account
01202 650900
Â
As low as £1,968.00 £1,640.00
Armitage Shanks Contour 21 Bucket Sink is a bucket filler stainless steel cleaners sink with a bucket grating and waste included for practical use. It also has a 28.5cm high splashback to keep the area tidy, with a clean satin finish to suit any washroom.
It is made from a durable stainless steel and has support legs for a long lasting and functional janitorial basin, to easily fill buckets and dispose of cleaning waste.
30 days free credit with
Buy Now, Pay Later, options at checkout
Armitage Shanks Contour 21 Bucket Sink is a bucket filler stainless steel cleaners sink with a bucket grating and waste included for practical use. It also has a 28.5cm high splashback to keep the area tidy, with a clean satin finish to suit any washroom.
It is made from a durable stainless steel and has support legs for a long lasting and functional janitorial basin, to easily fill buckets and dispose of cleaning waste.
This cleaners sink is floor mounted to allow for easy filling of large and heavy buckets without having to lift them too high, which could cause injury. The legs provide additional support.
Contour 21 does not include taps or bottle trap, so these items can be selected for purchase from the included options.
Bib taps can be chosen from the Nimbus 21 with crosshead controls, or the Alterna 21 which is lever controlled. Both of these taps are anti-vandal, and should be used with either an exposed inlet out concealed inlet wall mount. You can also purchase a bib tap extender to allow the taps to reach further over the bucket.
Bucket sink supported on two front legs and is held in position by screwing the two integral wall brackets directly to the wall. Screws and wall plugs not supplied.
This cleaners sink is ideal for any commercial location to help assist with regular cleaning, such as school, healthcare, hotels, offices, and leisure centres. It conforms to BS EN 10088 Part 2:2005 and NHS specification HBN 00-10. EN 13310
See data sheets attached for more information.
Key features:
- Stainless steel
- Satin finish
- Commercial use
- Bucket sink
- 28.5cm splash back
- 1 1/2" unslotted strainer waste included
- 11kg
Product codes:
- S1262MY - Angus Cleaners Sink Bucket Grating and Waste
- B1673AA - Nimbus 21 1/2" bib taps with anti-vandal outlet (pair)
- B1457AA - Alterna 21 bib taps 1/2"lever handles with anti-vandal outlet (pair)
- B1688AA - Nimbus 21 exposed bib tap wall mount with self centralising installation (pair)
- B1686AA - Nimbus 21 concealed bib tap wall mount with self centralising installation (pair)
- B1684AA - Bib tap extension (pair)
- S892567 - Armitage Shanks Trap 1½" plastic resealing bottle with 75mm seal, multi-purpose outlet
- F42045 - McAlpine Trap 1½" Water Seal Bottle Trap with Multifit Outlet
Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.
Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.
Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.
Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.
Delivery timescales
We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.
All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.
Further information can be found on our delivery service page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
