Single Sided Island Bench Seat Frame (No Slats)

This single-sided island bench seat frame is designed for use in commercial changing rooms and is suitable for both wet and dry environments. Suitable for installation adjacent to a wall, the frame should be floor mounted and used with either timber slats or solid grade laminate (SGL) panels (supplied separately).

Supplied in powder-coated black finish as standard with other colours available upon request (costs may vary).

The 1.6mm thick steel box frame is zinc plated on both internal and external surfaces prior to being powder coated. This forms part of the extensive 12 step pre-treatment and powder coating process prior to final assembly which guarantees their ability to withstand years of service in dry or wet changing rooms.

The fixing bolts are also manufactured from non-corrosive materials.

Each frame bracket has up to 3 separate slat fixing positions. We recommend that bench frames are positioned at a maximum 750mm apart and that slats overhang the frame by approximately 125mm.

The island bench seat position is 450mm high and projects 304mm from the wall. The overall height of the rear frame is 1700mm from floor level.

Tie bars are required to join frames together and to increase strength/support. Please use the following table to specify the numbers of tie bars and length:

Bespoke bench lengths will require custom tie bar lengths. Please contact our sales team prior to ordering.

NOTE - These frames are supplied with fixing down brackets and floor anchors along with all the required screws and bolts to assemble/install complete on site.

Price is for the frame only; wood or SGL slats are supplied separately.