Account
01202 650900
Â
As low as £519.60 £433.00
This Dudley Resan urinal comes in a polished gloss effect, has a back-to-wall design, as well as being damage-resistant and anti-ligature. Cast as a single piece, it is manufactured from a hard resin material making it virtually unbreakable.
The anti-ligature and vandal proof design of this urinal makes it ideal for washrooms where secure safety is a priority, such as prisons or mental health facilities.
30 days free credit with
Buy Now, Pay Later, options at checkout
This Dudley Resan urinal comes in a polished gloss effect, has a back-to-wall design, as well as being damage-resistant and anti-ligature. It is manufactured from a hard resin material making it virtually unbreakable.
The anti-ligature and vandal proof design of this urinal makes it ideal for washrooms where secure safety is a priority, such as prisons or mental health facilities.
Please note that this urinal has a rear fixed inlet, meaning it cannot be fixed to outside walls, instead often used with IPS panels.
The urinal itself does not include a waste, spreader, trap or fixings, so these can all be bought with the Dudley Resan urinal fixing kit. The waste in this kit is completely shrouded to prevent vandalism and costly repair bills from flood damage.
As this urinal is wall mounted, if you chose to use a cistern you will need a concealed automatic flush cistern. The mirage cistern comes in three sizes of 4.5L (ideal for a single urinal), 9L (ideal for 2-3 urinals), 13.5L (for 3 or more urinals).
More information is available on the data sheets attached.
Flush controls:
This urinal can be used with cistern and mains feed sensor flush controls, which will maintain the anti-ligature and anti-vandal applications of this product.
The Dudley Kinetic infrared urinal flush control is a ceiling mounted infrared sensor that detects movement by the urinal for efficient and water saving flushing. It is WRAS approved and has a tamper proof design as it fits flush to the ceiling and all the plumbing is concealed. This flush control requires a concealed urinal cistern for its water feed.
The Dudley Electroflo touch free urinal flush is a direct feed urinal, meaning flushing water comes straight from the mains supply and a cistern is not needed. This flush system will need a DC Pipe Interrupter (air gap) to prevent bacteria contaminating the mains water supply and to achieve fluid category 5 back flow prevention.
Product codes:
- PRESUR325601 - Dudley Resan Urinal
- PRESUR327395 - Dudley Accessories and Fixing Kit for Resan Urinal
- 327877 - Dudley Kinetic Infrared Urinal Flush Control - White
- 327878 - Dudley Kinetic Infrared Urinal Flush Control - Grey
- 327979 - Dudley Electroflo Touch-Free Urinal Sensor Flush Control - Stainless Steel
- 323687-1 - Dudley Electroflo Touch-Free Urinal Sensor Flush Control - Chrome
- 314128 - Dudley Mirage 4.5L Autocistern
- 318281 - Dudley Mirage 9L Autocistern
- 319755 - Dudley Mirage 13.5L Autocistern
- 327995 - Dudley Pipe Interrupter
Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.
Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.
Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.
Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.
Delivery timescales
We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.
All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.
Further information can be found on our delivery service page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
