On The Level SuperSlim Tile-In Wet Room Drainage Kit

As low as £820.80 £684.00
SS2FORM

The stylish SuperSlim Tile-In Kit from On The Level is a great addition to any wet room design. Its minimalistic style is great for customers who want to see less drainage in their wet room.

The Linear kit includes a former that is manufactured to have either a 2-way or 4-way fall that encourages all water to move towards the drain. The slim and stylish channel is completely reversible to be used with tiles or left as it is for a stainless steel finish.

The stylish SuperSlim Tile-In Kit from On The Level is a great addition to any wet room design. Its minimalistic style is great for customers who want to see less drainage in their wet room.

The Linear kit includes a former that is manufactured to have either a 2-way or 4-way fall that encourages all water to move towards the drain. The slim and stylish channel is completely reversible to be used with tiles or left as it is for a stainless steel finish.

OTL SlimLine Tile-In Features

  • A Modern and minimalist style for any wet room
  • Reversible stainless steel tile-in grating
  • SlimLine channels available in a range of sizes
  • Easy to install and supplied with full installation instructions
  • Sold as a complete system including; channel, former and tanking kit
  • Bespoke formers are available on request

SlimLine Kit Components

  • Tile-in Channel - The linear channel comes in stainless steel which can be reversed to show a tile insert if the user so desires. Standard stock sizes available: 600mm / 700mm / 800mm / 900mm / 1000mm / 1200mm
  • Gully - Supplied as standard with a horizontal gully than can cater for a variety of flow rates up to 50 LPM.
  • Former - The former comes in a range of sizes and comes with a built-in two-way or four-way fall.
  • Linear Tanking Kit - The tanking system helps to eliminate the problem of leakages from tiled wet room floor areas.

All You Need To Know About Tanking

The OTL Linear Tanking Kit has been specifically developed to eliminate leakages in tiled wet room floor areas and can be applied to a range of surfaces, including; Wood, Plasterboard, MDF, Concrete and screeds and most other commonly used construction boards.
The complete wet room floor area must be tanked including the bottom of the walls, turning up from the floor by a minimum of 100mm.

Once applied, the tanking is able to cope with structural movement in the floor and won't become brittle with age. It can also be used with all types of underfloor heating.

The Linear Tanking Kit covers up to 8m2 and contains the following:

  • 8kg compound
  • 1-litre primer
  • 10m tanking tape
  • 1x linear tanking mat
Write Your Own Review
You're reviewing:On The Level SuperSlim Tile-In Wet Room Drainage Kit