Rise and Fall Toilet Cubicle Hinge (Pair)

£18.00 £15.00
0H01
Typically 1-2 Working Days

A straight forward and cost effective toilet cubicle hinge, the 0H01 hinge is available to suit panel thicknesses of 17 to 21mm.

A straight forward and cost effective toilet cubicle hinge, the 0H01 hinge is available to suit panel thicknesses of 17 to 21mm.

The hinge is fitted to the edge of the door by a 6mm wood/metal dowel; this requires the edge of the door to be pre-drilled prior to fitting. The fascia component is simply screwed into the back of the fascia using three standard wood screws.

The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between.

A hidden screw is fitted to each hinge to prevent the doors from being lifted off.  Where immediate access is required these screws may be discarded so the door can be easily lifted off.

Silver Anodised Aluminium as standard, but is also available in a variety of powder coated colours at an increased cost and longer lead time. For additional colours, please contact us.

The hinges are packed in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm).

Where heavy or outward opening doors are fitted, we would advise the fitting of three or more hinges to the door.

For a more heavy duty hinge option, consider our Impact Resistant Rise and Fall Cubicle Hinge (0H10).

Write Your Own Review
You're reviewing:Rise and Fall Toilet Cubicle Hinge (Pair)