Account
01202 650900
Â
As low as £123.60 £103.00
This freestanding bench seat frame is designed for use in commercial changing rooms and is suitable for both wet and dry environments. The bench frame is secured by fixing to the floor meaning it is particularly suitable for installations where a solid, load-bearing wall does not exist.
The frame should be used with either timber slats or solid grade laminate (SGL) panels (supplied separately). Supplied in powder-coated black finish as standard with other colours available upon request (costs may vary).
30 days free credit with
Buy Now, Pay Later, options at checkout
This freestanding bench seat frame is designed for use in commercial changing rooms and is suitable for both wet and dry environments. The bench frame is secured by fixing to the floor meaning it is particularly suitable for installations where a solid, load-bearing wall does not exist.
The frame should be used with either timber slats or solid grade laminate (SGL) panels (supplied separately). Supplied in powder-coated black finish as standard with other colours available upon request (costs may vary).
The 1.6mm thick steel box frame is zinc plated on both internal and external surfaces prior to being powder coated. This forms part of the extensive 12 step pre-treatment and powder coating process prior to final assembly which guarantees their ability to withstand years of service in dry or wet changing rooms.
The fixing bolts are also manufactured from non-corrosive materials.
Each frame bracket has up to 3 separate slat fixing positions. We recommend that bench frames are positioned at a maximum 750mm apart and that slats overhang the frame by approximately 125mm.
The bench seat position is 450mm high and is 304mm deep.
Tie bars are required to join frames together and to increase strength/support. Please use the following table to specify the numbers of tie bars and length:
|
Bench Length |
Frames Required |
Tie Bars Required |
Tie Bar Length |
|
500mm |
2 |
1 |
212mm |
|
1000mm |
2 |
1 |
712mm |
|
1500mm |
3 |
2 |
587mm |
|
2000mm |
4 |
3 |
546mm |
|
2500mm |
4 |
3 |
712mm |
|
3000mm |
5 |
4 |
650mm |
Â
Bespoke bench lengths will require custom tie bar lengths. Please contact our sales team prior to ordering.
NOTE - These frames are supplied with fixing down brackets and floor anchors along with all the required screws and bolts to assemble/install complete on site.
Price is for the frame only; wood or SGL slats are supplied separately.
Product codes:
- BSF05P01 - Black Freestanding Bench Seat Frame
- BSFTBP02212 - 212mm Tie Bar For Bench Seat Frame
- BSFTBP02546 - 546mm Tie Bar For Bench Seat Frame
- BSFTBP02587 - 587mm Tie Bar For Bench Seat Frame
- BSFTBP02650 - 650mm Tie Bar For Bench Seat Frame
- BSFTBP02712 - 712mm Tie Bar For Bench Seat Frame
Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.
Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.
Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.
Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.
Delivery timescales
We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.
All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.
Further information can be found on our delivery service page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
