Contractor Vanity Unit Pack

As low as £205.20 £171.00
ContractVU

The Contractor vanity unit pack is the ultimate solution for a fast delivery, low cost, no-nonsense washroom vanity unit. Designed to be finished on site these packs are supplied 'off the shelf'. For an installer who requires size flexibility and "off the shelf" availability, this is the ideal choice.


The Contractor vanity unit pack is the ultimate solution for a fast delivery, low cost, no-nonsense washroom vanity unit. Designed to be finished on site these packs are supplied 'off the shelf'. For an installer who requires size flexibility and "off the shelf" availability, this is the ideal choice.

Vanity Top: 
To keep costs down the vanity unit top is a 25mm thick high-pressure laminate (HPL) sheet, with half round bull nose edging to the front.

All panels can be trimmed to suit the site dimensions with cut edges hidden inside the unit and against washroom walls.

Please note: Contractor Vanity Units are not suitable for semi-recessed basins.

Under Frame and Access Panels: 
The underframe and access panels are manufactured from melamine faced chipboard paneling (MFC). As such these vanity units are ONLY suitable for dry areas with low-normal humidity levels.

Colours: 
Our Contractor range is available off the shelf and as such is limited to the following colour choices.

Vanity Top/Frame Colours:

  • White
  • Grey

Vanity Access Panel Colours:

  • White
  • Grey
  • Green
  • Dark Pattern
  • Light Pattern
  • Blue
  • Woodgrain
  • Magnolia

Vanity Unit Sizes:
Standard sizes for Contractor Vanity units are 800mm high, 600mm deep and come in three set lengths, 1m, 2m and 3m. Lengths above or below these set sizes are created by cutting the vanity frame and top down on site. The contractor vanity units are supplied flat packed and designed to be finished on site meaning they can be manufactured and delivered quickly.

If your vanity unit is positioned so that either end is exposed (and not against a wall), you will also need to order end panels for the exposed ends. End panels are not required if the vanity unit runs from wall to wall.

All vanity units and toilet cubicle rows displayed on the website Commercial Washrooms are straightforward to install for any competent tradesman.

Write Your Own Review
You're reviewing:Contractor Vanity Unit Pack