Replacement Toilet Cubicle Partitions (MFC / HPL / SGL)

As low as £378.00 £315.00
TCP01

Individual cubicle partitions can be used to replace existing damaged and vandalised partitions. Supplied as standard at 1800mm x 1800mm, the partitions do not come with any hardware and are undrilled so they can be drilled to suit and match existing hardware.

The partition can be cut down to suit the required dimensions of your cubicles, but please note that cut edges should be hidden in channels. Alternatively, if you have a specific size you need the partitions to match then call our sales team.

Individual cubicle partitions can be used to replace existing damaged and vandalised partitions.

Supplied as standard at 1800mm x 1800mm, the partitions do not come with any hardware and are undrilled so they can be drilled to suit and match existing hardware.

The partition can be cut down to suit the required dimensions of your cubicles, but please note that cut edges should be hidden in channels. Alternatively, if you have a specific size you need the partitions to match then call our sales team.

Be aware the prices displayed are for the standard dimensions detailed above so variations on this may increase the cost. Only SGL cubicle partitions are available in the full range of colours displayed.

Available in the following three materials:

  • 18mm MFC (Melamine Faced Chipboard)
  • 13mm SGL (Solid Grade Laminate)
  • 18mm HPL (High-Pressure Laminate)

An attractive range of colours is available. Please see attached Polyrey and Formica colour charts. Other finishes available at an increased cost.

The key within the document shows which colours are available in which material (MFC, SGL, HPL). If you require a colour not shown here then please get in touch and we will do our best to help you.

For any questions regarding dimensions, materials, or colours, or for any other help, please get in touch with our sales team.

Write Your Own Review
You're reviewing:Replacement Toilet Cubicle Partitions (MFC / HPL / SGL)