Rise And Fall Vandal Resistant Toilet Cubicle Hinge (Pair)

£15.00 £12.50
0H03

Similar in design to the 0H01 Rise and Fall Toilet Cubicle Hing, this Vandal Resistant Hinge's twin bolt through fascia fixing provides an additional level of stability and confidence for use in areas where there is a risk of vandalism by users.

The door fixing is the same as the 0H01 hinge using a 6mm screw in a pre-drilled hole in the edge of the door. The fascia requires two holes per hinge to accommodate the nickel plated brass "T" nuts.

Similar in design to the 0H01 Rise and Fall Toilet Cubicle Hing, this Vandal Resistant Hinge's twin bolt through fascia fixing provides an additional level of stability and confidence for use in areas where there is a risk of vandalism by users.

The door fixing is the same as the 0H01 hinge using a 6mm screw in a pre-drilled hole in the edge of the door. The fascia requires two holes per hinge to accommodate the nickel plated brass "T" nuts.

The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between, and a hidden screw is fitted to each hinge to prevent the doors from being lifted off; where immediate access is required, these screws may be discarded so the door can be easily lifted off.

Features:

  • Suitable as a standard for 17-21mm thicknesses, it can be adapted to suit other sizes on request.
  • The hinges are packed in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm)
Write Your Own Review
You're reviewing:Rise And Fall Vandal Resistant Toilet Cubicle Hinge (Pair)