We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Solid Surface Vanity Top with Moulded Corian Basins (Inset Style)
As low as £614.40 £512.00
The Commercial Washroom's Solid Surface vanity tops with inset moulded basins tick all the right boxes to achieve that stunning and sophisticated washroom finish. Complete with factory fitted moulded, inset style Corian Basins.
The vanity tops are made from 12mm thick sheets of Tristone acrylic composite material (equivalent to Corian) mounted onto a moisture resistant MDF substrate. The solid surface material is unique in giving customers the ability to renew the surface from damage by sanding and polishing out any scratches or wear and tear.
The Commercial Washroom's Solid Surface vanity tops with inset moulded basins tick all the right boxes to achieve that stunning and sophisticated washroom finish. Complete with factory fitted moulded, inset style Corian Basins.
The vanity tops are made from 12mm thick sheets of Tristone acrylic composite material (equivalent to Corian) mounted onto a moisture resistant MDF substrate. The solid surface material is unique in giving customers the ability to renew the surface from damage by sanding and polishing out any scratches or wear and tear.
The Solid Surface material is manufactured to a seamless stone-like appearance. Durable, Hygienic and attractive, our Solid Surface vanity units bring a touch of luxury to any commercial washroom.
The pre-moulded basins are a Corian cameo white solid material and measure 415mm x 300mm x 133mm deep. Vanity tops are supplied with the required wall fixing brackets. The price shown is for the colour Pure White, we can price the alternative colours displayed upon request.
Underframes and access panels can be purchased in either High-Pressure Laminate (HPL) or Solid Grade Laminate (SGL). *HPL should only be used in a predominantly dry environment where the risk of water dropping onto the access panels is minimal. SGL underframes are suitable for wet or dry environments.
The solid surface vanity tops are available in either a full inset or semi-recessed style
Vanity Top Sizes:
Our standard inset solid surface washroom vanity top comes 600mm deep, with 100mm rear up-stand and a 200mm front down-stand. The corresponding semi-recessed style measures 350mm deep with the same size upstands and downstands.
A choice of standard lengths is available to suit different numbers of users (all dimensions in mm). We recommend 1 basin for every 600mm of vanity unit length. Pricing displayed reflects this.
Vanity tops over 3000mm long are available (price on request) but will require joining onsite by our approved Solid Surface fabricator (This is an additional cost).
Colours:
Please download the attached colour sheet for our standard colour range. Further options available on request (prices may alter).
The price displayed is for a vanity top and Corian basin only. Underframe/access panels (VUUF) are sold separately and can be selected from the drop-down options. Alternatively, support legs are available. Please select colours from the Polyrey or Formica colour charts attached.
Non-standard bespoke vanity tops can be manufactured on request.