100mm Mixed Flow Extraction Fan With Timer

£66.00 £55.00
405675

100mm in-duct mounted mixed flow fan with 3 speeds has been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

With an air flow rate of 245m3/h the 100mm mixed flow fan can cope with much longer duct runs than a standard axial fan without any significant loss of power. The overrun timer keeps the fan running for up to 20 minutes after the power is turned off, this is set upon installation.

100mm in-duct mounted mixed flow fan with 3 speeds has been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

With an air flow rate of 245m3/h the 100mm mixed flow fan can cope with much longer duct runs than a standard axial fan without any significant loss of power. The overrun timer keeps the fan running for up to 20 minutes after the power is turned off, this is set upon installation.

Suitable for use in restricted spaces such as ceiling voids traditionally found in refurbishments.

Key Features:

  • Integral foot plate provides secure, fast mounting
  • Spigot designed for speedy installation of flexible ducting.
  • Mixed flow fans develop greater pressure than conventional axial fans making them ideal for use in ducted systems
  • 3 Speed fan setting

Technical Specification:

  • Fully Building Code Compliant
  • IPX4 rated CE marked in accordance with all the relevant EEC Harmonised Directives
  • Double Insulated with motor fitted with Thermal Protection

Product Range Details:

  • Rated Voltage 220-240v-50Hz
  • High Rated Wattage 25W
  • Low Rated Wattage 20W
  • High Speed Noise Level: 24dB(A) at 3m
  • Low Speed Noise Level 20dB(A) at 3m
Write Your Own Review
You're reviewing:100mm Mixed Flow Extraction Fan With Timer
  1. Why Washroom Ventilation is Important Why Washroom Ventilation is Important Here we take a look over some of the main reasons why ventilation is needed in commercial washroom environments.