Bobrick Tempered Glass Welded-Frame Mirror

As low as £105.60 £88.00
B-2908-C

Welded satin stainless steel framed tempered glass mirror produced by leading American washroom manufacturer Bobrick. The 304 satin stainless steel frame is corrosion-resistant and offers an attractive and robust finish to any washroom.

Tempered glass mirrors resist breakage and provide a measure of safety from broken glass, but differ in colour and reflective quality from standard glass mirrors. Available in 3 sizes ranging from 460mm wide to 910mm high to cater for various scenarios.

Welded satin stainless steel framed tempered glass mirror produced by leading American washroom manufacturer Bobrick. The 304 satin stainless steel frame is corrosion-resistant and offers an attractive and robust finish to any washroom.

Tempered glass mirrors resist breakage and provide a measure of safety from broken glass, but differ in colour and reflective quality from standard glass mirrors.

Available in 3 sizes ranging from 460mm wide to 910mm high to cater for various scenarios. The frame is a one-piece, roll-formed 3/4″ x 3/4″ (19 x 19mm) angle-frame. The frame corners are heliarc welded, ground and polished smooth.

Popular in general use washrooms but also suitable for school toilets, offices and leisure and sport environments. Can be installed within a shower and changing room facility with low humidity.

Comes complete with a galvanized steel back that has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall. Locking devices secure the mirror to the concealed wall hanger for a theft-resistant mounting.

Available in the following sizes:

  • B-2908 1830: 18" W x 30" H (46 x 76cm)
  • B-2908 1836: 18" W x 36" H (46 x 91cm)
  • B-2908 2436: 24" W x 36" H (61 x 91cm)

Note 1: For sufficient space to lift mirror onto wall hanger(s), provide 1" (25mm) minimum clearance above the top of the mirror frame. Provide 1'' (25mm) minimum clearance at bottom of mirror for unlocking mirror from the wall and 1/2'' (12.7mm) minimum clearance on each side.

Note 2: Bobrick uses the highest quality tempered glass mirrors. Modest distortion or heat-generated markings are normal in the tempered glass mirror manufacturing process. Therefore, we will not accept returns of tempered glass mirrors with random distortion or markings.

Write Your Own Review
You're reviewing:Bobrick Tempered Glass Welded-Frame Mirror