Calibre HPL - Toilet Cubicles - Bespoke Designs

£699.60 £583.00
Calibre-Cub

Calibre is a premium range washroom cubicle system that is manufactured using an HPL with hardwood edging on the doors and pilasters. Particularly suited to offices and prestigious washroom areas.

The Toilet Cubicle prices displayed incorporate the common layout scenarios. Between walls assumes 2 solid walls on either side of the cubicle run and wall angle assumes the run of cubicles will be installed against 1 solid side wall.

Compatible file extensions to upload: png, jpg, gif

Calibre is a premium range washroom cubicle system that is manufactured using an HPL with hardwood edging on the doors and pilasters. Particularly suited to offices and prestigious washroom areas.

The Toilet Cubicle prices displayed incorporate the common layout scenarios. Between walls assumes 2 solid walls on either side of the cubicle run and wall angle assumes the run of cubicles will be installed against 1 solid side wall.

This very popular toilet cubicle range comes complete with Stainless Steel (SS) wall brackets, adjustable leg, lock, and hinges.

Doors and Pilasters are manufactured from 38mm moisture resistant chipboard core with HPL Face with hardwood rebated edges (Door Handing required due to the rebated hardwood edging).

The partitions are manufactured using a 24mm moisture resistant chipboard and bonded with the selected colour with the edges edged all round in a matching HPL, also pre-drilled for the lock and leg. Our indicators are all emergency release and accessible from the outside with a specially designed release mechanism.

An attractive range of colours is available. Please see attached Polyrey and Formica colour charts. Other finishes available at an increased cost.

This system is deigned to a very high specification thus the name “Calbre”. It’s ideal for any prestigious washroom environment.

Toilet Cubicle Installation:
This commercial use washroom is a bespoke carpentry design washroom cubicle and is ideally installed by a qualified carpenter. 

System options include toilet cubicles/partitions, IPS (integrated plumbing system) duct panelling, vanity units, light pelmets etc. A full wood effect colour range is available.

Dimensions:

  • Maximum Overall Height: 2800mm (20mm floor clearance) 

  • Maximum Partition Square Height: 2800mm 

  • Partition Depth: made to depth required (1600mm max)

  • Maximum Pilaster Height: 2800mm

  • Pilaster Width: Made to measure

  • Door Width: Made to measure

  • Maximum Door Height: 2800mm high 

Write Your Own Review
You're reviewing:Calibre HPL - Toilet Cubicles - Bespoke Designs