This Delabie Wall Mounted Sensor Tap (Various Lengths) is a classic automatic sensor tap with modern infrared controls. Ideal for installation above wash troughs and basins when plumbing services can be concealed behind IPS panels or a service void.

Available spout lengths: 150mm, 200mm or 250mm. Supplied with a brushed stainless-steel finish as standard; a polished finish is also available.

The Aquarius spout features a simple design that ensures the ultimate in hygiene and aesthetics for the most discerning clients. The robust design and build quality also make it ideal for heavy industrial and general commercial applications. Also very popular in healthcare settings.

When a user places their hands under the tap, the infrared detector activates the solenoid valve and opens it. The valve stays open while the user’s hands are under the tap, allowing them to wash thoroughly. Once the user removes their hands, the sensor activates the solenoid valve to close, stopping water flow.

The Aquarius wall-mounted spout is manufactured from stainless steel, with a solid 38mm stainless steel ingot for the head assembly. Supplied with PEX tails as standard; copper tails also available (predominantly used within healthcare settings).

Power options include both battery and mains electrical supply. Mains power kits are available for 1-, 2-, or 3-station scenarios (taps must be adjacent to each other). Battery kits are available only for 1 tap.

Additionally, choose from a standard water pressure or a low-pressure arrangement. The standard pressure setup assumes 1-6 bar; low-pressure kits are available for 0-1 bar.

A45 taps can be pre-set before delivery or adjusted on-site using a handheld controller (at an additional cost). All taps feature a chlorination option for new installations or when flushing is required, plus a built-in purge facility, ideal for areas where water quality is critical. Several helpful reporting features are also accessible via the hand-held controller (sold separately), including the number of tap operations and purges.

All electronics are housed within the tap body. A separate solenoid valve controls water flow and connects to the tap via secure IP65-rated connection cables. The power supply or battery pack is also connected in the same way.

All Aquarius sensor taps have an anti-vandal mode that ensures the tap will run for only 1 minute if someone deliberately blocks the sensor. The sensor will lock off until it is cleared, and the tap resets, preventing water waste and the risk of overflow or flooding.

Features:

5-Year Manufacturer’s Warranty *
WRAS Approved Product
Fully Programmable with adjustable run-on time and anti-vandal Lockout Time
Extensively developed and tested to achieve the current high levels of reliability
Uses the “optimum” amount of water
Hygienic - Helps avoid cross-infection
Easy to use - Ideal for disabled, elderly or young children
Battery or mains powered
Easy to install and maintain
Available in brushed stainless steel (BSS) or polished finish (PSS).
Connection options – PEX sold as standard; copper tails also available

Tap kits include a battery pack or mains power supply (PSU), solenoid valves, and associated connecting leads. Standard pressure suitable for 1- 6 bar. Low-pressure available (please enquire); suitable for 0-1 bar.

KWC DVS Manufacturer Warranty - Spouts and Taps are guaranteed for 5 years from the date of purchase against defects in material and workmanship. The automatic tap kits are guaranteed for 2 years from the date of purchase against defects in material and assembly. Solenoid valves are guaranteed for 12 months, subject to water conditions. However, the valve internals are expected to operate efficiently for many years.

Product codes:

AT02-001 - 150mm, Brushed Stainless Steel, PEX Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-003 - 150mm, Brushed Stainless Steel, Stainless Steel Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-011 - 200mm, Brushed Stainless Steel, Pex Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-013 - 200mm, Brushed Stainless Steel, Stainless Steel Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-021 - 250mm, Brushed Stainless Steel, Pex Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-022 - 250mm Brushed Stainless Steel, Copper Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-023 - 250mm Brushed Stainless Steel, Stainless Steel Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-025 - 250mm Polished Stainless Steel, PEX Tails DVS Aquarius Wall Mounted Sensor Tap

AT02-026 - 250mm Polished Stainless Steel, Copper Tails DVS Aquarius Wall Mounted Sensor Tap

Power Kits

AT00-001 - DVS Single station battery kit standard pressure - 1-6 BAR brass valve

AT00-002 - DVS Single station mains kit standard pressure - 1-6 BAR brass valve

AT00-003 - DVS two-station mains kit, standard pressure -1 - 6 BAR, brass valve

AT00-004 - Three-station mains kit, standard pressure -1 - 10 BAR, brass valve

AT00-005 - Single station battery kit, low pressure - 0.5 - 1 BAR brass valve

AT00-006 - DVS single-station mains kit, low pressure - 0.5 - 1 BAR brass valve

AT00-007 - Two-station mains kit, low pressure - 0.5 - 1 BAR brass valve

AT00-008 - DVS three-station mains kit, low pressure - 0.5 - 1 BAR brass valve

Commercial Bathroom Ideas Commercial Washrooms have been supplying and installing high-quality washroom fixtures for over a decade. In this guide, we lay out some design ideas we hope will inspire you in your own commercial bathroom project.

Hampton School Toilets & Changing Room Refurbishment - Case Study Hampton School is a historic and highly esteemed private school in South West London. Having previously refurbished the 6th form washrooms in 2017, we were invited back to overhaul a series of washrooms throughout the campus.

How Dart Valley Systems Can Slash Your Water Usage We look at how Dart Valley Systems (DVS) have risen to become on of the washroom industry's most innovative companies. They have dedicated their business to water-saving technology...

The Benefits of Wall Mounted Taps It can be a chicken and egg situation. Sometimes your tap choice can dictate the basin you need, often it’s the other way around. Here’s our breakdown on wall mounted taps…

North London Charity: Washroom Redesign and Refurbishment - Case Study A north London charity reached out to us during a large refurbishment of their head offices. Choosing to use a specialist contractor for the washrooms allowed them to not only get a high-end finish but have works delivered in an orderly, well ...

Full delivery details, including costs and timescales, can be found on our delivery service information page.

Product Returns

We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.

If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.

Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.

Please Note: Geberit Products cannot be returned due to the Manufacturers own zero-return policy.

Email: orders@commercialwashroomsltd.co.uk

Phone: 01202 650900

Click here to read our full Terms on Returns.

Product Warranty

Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.

Email: orders@commercialwashroomsltd.co.uk

Phone: 01202 650900

Click here to read our full Terms and Conditions.

Delabie DVS Aquarius Wall Mounted Sensor Tap (Various Lengths)

Customise Delabie DVS Aquarius Wall Mounted Sensor Tap (Various Lengths)

Your Customisation