Full Height Blank IPS Duct Panel Set

Integrated Plumbing Systems (IPS) offer a complete solution for projects where concealed plumbing and services are required. With a simple five-step installation, it is easy to specify and install and can save up to 20% in cost when compared to traditional methods, while at the same time saving valuable time on site.

Our full height blank panel sets are available as panels only, or complete as pre-manufactured steel or timber frames with factory mounted panels. Designed to fit in a run of duct sets and between walls or other panelling, we can also supply these as free-standing units at additional cost.

Material: A choice of panels manufactured from:

• Melamine Faced Chipboard (MFC): 18mm, square-edged with 2mm PVC in graphite (dark grey).
• High-Pressure Laminate (HPL): 20mm laminated chipboard with post-formed edges.
• Solid Grade Laminate (SGL): 12.5mm solid resin panels with rounded edges.

Please see the following description if unsure on material types. Unless otherwise specified all infills will be manufactured from MFC, regardless of access panel material.

The price displayed is for single half-height melamine faced chipboard (MFC) panel set only (no frame). The price will alter on changing the drop-down options.

For installations within the corner of a room (against a wall) please add 1 return end to close off either the right or left-hand side. 2 return ends are required for left and right-hand ends to be closed.

Standard Dimensions (site-specific measurements available):

• Height = 2400mm from floor level
• Width = 1000mm
• Depth = 300mm

Site-specific measurements are available and made to manufacture.

The blank panel systems are ideal for concealing unsightly pipework. This product can be used to mount any commercial sanitaryware type (sold separately) - toilets, urinals or basins. Please check the fixings to be used when purchasing your sanitary ware.

Commercial Washrooms can supply a range of Commercial Sanitaryware as a complete package with the panel sets.  Colours are from our standard colour range - see attached PDF.

Note: When specifying the full height blank duct set for use with a wall hung toilet please select the steel frame option and include our wall-hung WC IPS support bracket. The support bracket is only required when installing a wall hung toilet.