Account
01202 650900
Our range of Flush Fronted, Full Height Veneer Toilet Cubicles is 44mm thick and suitable for ceiling heights of up to 2.7m. This range of cubicles is made to measure with stainless steel hardware and offers a genuine ‘premium quality’ system.
All panel faces are finished with natural wood veneers and have rebated hardwood edges for cubicle doors and pilasters. The panels have a moisture-resistant core but are only suitable for dry washroom areas.
30 days free credit with
Buy Now, Pay Later, options at checkout
Our range of Flush Fronted, Full Height Veneer Toilet Cubicles is 44mm thick and suitable for ceiling heights of up to 2.7m. This range of cubicles is made to measure with stainless steel hardware and offers a genuine ‘premium quality’ system.
All panel faces are finished with Natural Wood Veneers and are complete with rebated Hardwood edges to all cubicle doors and pilasters. The panels have a moisture-resistant core but are only suitable for dry washroom areas.
This cubicle system is particularly suited to high-end offices but can also be suitable for other general commercial washroom areas.
The toilet cubicle prices displayed incorporate the common washroom layouts. Between walls assumes two solid walls on either side of the cubicle run, and wall angle assumes the run of cubicles will be installed against one solid side wall.
The inline configurations suit two walls on either side and a partition and door inline.
An attractive range of real veneer colours is available on request.
Materials Specification:
Doors: Natural Veneer bonded onto 44mm MR core. Rebated Hardwood Edges (Oak as standard). Sealed two coats AC Lacquer.
Partitions: Natural Veneer bonded onto 36mm MR core, matching laminate edge detail.
Pilasters: Natural Veneer bonded onto 44mm MR core. Rebated Hardwood Edges (Oak as standard). Sealed two coats AC Lacquer.
Continuous head section: Natural Veneer bonded onto 44mm MR core. Rebated Hardwood Edges (Oak as standard). Sealed two coats AC Lacquer.
Hardware: Stainless steel as standard - Continuous 'T' section Pilaster fixing channel, Royde and Tucker D-Line Stainless Steel rise and Fall Hinges, D-Line Eisenware Large Turn SSS, Deadbolt with striking plate/keep, 38mm ‘U’ section SAA floor channel, Hat and Coat hook 90mm, Rear Wall ‘T’ section division fixing channel, 3mm door/pilaster cushion gasket
Dimensions Guide:
- Overall Cubicle Height: up to 2700mm (standard height option also available)
- Partition Depth: up to 1800mm
Cubicle Installation:
All toilet cubicle ranges displayed on the Commercial Washrooms website are straightforward to install for any competent tradesman. However, for those in need of a full supply and installation service, we can help. Please contact the team for full details.
For a full quotation, please contact us with your room(s) layout.
Small Items: Standard delivery is £10 + VAT per delivery. This one-off standard charge applies to all our products, except our cubicles, vanity units, wash troughs, IPS panelling range, and fragile items such as sanitaryware and mirrors.
Fragile Items: Pallet delivery starts from £40 + VAT with prices varying depending on delivery location. Fragile products include ceramic sanitary ware, Doc M Packs, and mirrors. Pallet shipments to Northern Scotland and Northern Ireland start from £100 + VAT.
Oversized Items: Delivery costs of bespoke cubicles, IPS panels, vanity units and other bulky products start at £105 and vary depending on the delivery location.
Deliveries to Ireland, Europe and worldwide are available and are quoted on a case-by-case basis. Please get in touch with the Commercial Washrooms sales team for further information and bespoke delivery prices.
Delivery timescales
We operate a next-day delivery service on all stocked items, including pallet deliveries, to standard UK locations. Delivery timescales will vary for any items not in stock. Please get in touch if time is of the essence for an accurate lead time.
All bespoke products such as cubicles and vanity units are on extended lead times to allow for manufacturing time. This is typically 18-21 working days from drawing sign-off.
Further information can be found on our delivery service page.
Product Returns
We are happy to accept returned items that are no longer required as long as they are in A1 condition and in their original unopened packaging. To arrange a return, please notify our after-sales team within five days of delivery.
If any goods are found to be damaged or faulty, we require email evidence and confirmation within two working days of receipt.
Any non-faulty Goods which are non-stock Goods, or which are bespoke, made-to-measure, personalised, customised, made to the Customer’s specification or specially ordered (Restricted Goods) may not be returned.
Email: [email protected]
Phone: 01202 650900
Product Warranty
Many of the products we sell come with a manufacturer’s warranty, guarantee or similar assurance. Although we do not have any responsibility or liability under or in connection with any such warranty, guarantee or assurance, we will manage any warranty claim. Please contact us in the first instance.
Email: [email protected]
Phone: 01202 650900
