Future HPL Changing Cubicles for Dry Environments

As low as £699.60 £583.00
CHFuture

Future changing cubicles are designed for installation in changing rooms with a predominantly dry environment. Suitable for changing rooms with low humidity such as gyms and schools. Not suitable for swimming pools or areas with high humidity.

All cubicle doors and partition panels are manufactured from 18mm thick Melamine Faced Chipboard (MFC) grade board as standard with a moisture resistant core and high impact resistant melamine facing. Panel edges are finished with 2mm PVC trim. Pilasters are manufactured from post formed high-pressure laminate (HPL) which leaves an attractive rounded edge.

Future changing cubicles are designed for installation in changing rooms with a predominantly dry environment. Suitable for changing rooms with low humidity such as gyms and schools. Not suitable for swimming pools or areas with high humidity.

All cubicle doors and partition panels are manufactured from 18mm thick Melamine Faced Chipboard (MFC) grade board as standard with a moisture resistant core and high impact resistant melamine facing. Panel edges are finished with 2mm PVC trim. Pilasters are manufactured from post formed high-pressure laminate (HPL) which leaves an attractive rounded edge.

The cubicle fittings come in satin anodised aluminium finish as standard.

The toilet cubicle prices displayed incorporates the common washroom layouts. Between walls assumes 2 solid walls on either side of the cubicle run and wall angle assumes the run of cubicles will be installed against 1 solid side wall.

Cubicle Colours:

An attractive range of colours is available. Please see attached Polyrey and Formica colour charts. Other finishes available at an increased cost. Availability is only in the MFC indicated options.

Cubicle Installation:

All toilet cubicle ranges displayed on the Commercial Washrooms website are straight forward to install for any competent tradesman. However, for those in need of a full supply and installation service we can help. Please contact the team for full details.

For a full quotation please contact us with your room(s) layout.

Materials Specification:

Doors: 18mm moisture resistant Melamine Faced Chipboard (MFC) with 2mm high impact ABS edging

Partitions: 18mm moisture resistant Melamine Faced Chipboard (MFC) with 2mm high impact ABS edging

Pilasters: 18mm Moisture resistant high-density particle board core faced with 0.8mm HPL, radius post formed vertical profile with 2mm high impact ABS edging

Hardware: Satin Anodised Aluminium (SAA) fittings – Headrail, pilaster brackets, wall brackets, adjustable leg, Pilaster lock and hinges.

Dimensions Guide:

  • Overall Cubicle Height: 2000mm including 150mm adjustable leg clearance
  • Partition Square Height: 1800mm
  • Partition Depth: Made to depth required
  • Pilaster Height: 1850mm
  • End/Wall Pilaster Width: 115mm
  • Centre Pilaster Width: 230mm
  • Door Width: Made to measure
  • Door Height: 1800mm
Write Your Own Review
You're reviewing:Future HPL Changing Cubicles for Dry Environments