3501-4000mm, Inset (SGL) Postformed Laminated Vanity Top

£1,492.80 £1,244.00
PFLVANSGL-4000-I

Solid Grade Laminate (SGL) vanity top for a stylish design at an affordable price. Suitable for use in conjunction with either a support leg or vanity underframe (VUUF) with easy access panels.

The price displayed is for a vanity top only - 3501-4000mm, Inset. Support leg or underframe/access panels are sold separately.

Solid Grade Laminate (SGL) vanity top for a stylish design at an affordable price. Suitable for use in conjunction with either a support leg or vanity underframe (VUUF) with easy access panels.

The price displayed is for a vanity top only - 3501-4000mm, Inset. Support leg or underframe/access panels are sold separately.

The vanity top is a fully formed 12.5mm thick Solid Grade Laminate (SGL) panel. The panel is shaped to provide a rear up-stand and front down stand. The vanity top is supplied without holes for basins, these must be cut on site by the purchaser to suit the desired basin.

Colours: SGL vanity tops come in a wide variety of laminate colours from either Polyrey or Formica washroom ranges. please see the attached PDFs for details. Alternative colours are available on request.

Sizes:
Vanity units are priced and purchased at various length bands but are usually manufactured to your exact requirements. Please choose from either an inset (600mm deep as standard) or a semi-recessed depth (350mm deep as standard).

  • Full depth inset vanity units:  Designed to have an inset basin fitted within the vanity top. Measurement: 100mm rear up-stand, vanity bed 600mm, 200mm forehead (front down stand).
  • Semi-recessed vanity units: Ideal when space is at a premium! The semi-recessed basin is recessed within the vanity forehead (front down stand) allowing a shorter top bed. Measurement: 100mm rear up-stand, vanity bed 350mm, 300mm forehead (front down stand).

After purchasing online we will be in contact to establish the exact dimensions of the vanity unit you require and your desired colours. Any top over 3500mm long will have a join in the top.

If your vanity unit is positioned so that either end is exposed (and not against a wall), you will also need to order end capping for each exposed end. Capping is not required if the vanity unit runs from wall to wall.

All vanity units and toilet cubicles displayed on the Commercial Washrooms website are straightforward to install for any competent tradesman.

Write Your Own Review
You're reviewing:3501-4000mm, Inset (SGL) Postformed Laminated Vanity Top